HDPE LLDPE

group name: Plastic Raw Material

Min Order: 1 piece

brand name: TSH

model: plastic

update time: Fri, 04 May 2012 14:38:55 GMT

contact supplier

Packging & Delivery

Min Order1 piece

Briefing

CAS No.: 9002-88-4
High Density Polyethylene

CAS No.: 13-90-8
LLDPE

Detailed

1. High Density Polyethylene Specifications

Make barrela, plastic bottle and bag, make all kind of pipes, make shading

net, and make cable wire-insulating

HDPE cable material Property	Unit	Typical Value
Mass density	g/cm 3	0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)	g/10min	≤1.0
Tensile yield strength	MPa	≥19.0
Flexural modulus	Mpa	≥965
Elongation@ break	%	≥400
Impact Embrittlement temperature	centidegree	MAX -118
Dielectric Constant	100KHZ	2.32
Dielectric Constant	1MHZ	2.31
Loss Tangent	100KHZ	MAX 0.0001
Loss Tangent	1MHZ	MAX 0.0001
Volume resistivity	OHM-CM	MIN 1x10 15
Application	Mainly used for the production of high toughness of the telephone,cable insulation material

1. LLDPE Specifications

It has a very excellent resistance to environmental stress cracking resistance, weather resistance, wear resistance and excellent electrical performance, excellent out to get a good performance out of the surface.

Purpose:The products can be used to make power cables, control cables,
optical cables, telephone cables and signal cables outer sheath.

serial number	item-name	unit	typical value	test methods	serial number
1	melt phase polycondensation	g/10min	1.3	GB/T2951.41	IEC60811-4-1
2	density	g/cm3	0.935	GB1033	ASTM D1505
3	Tensile Strength	MPa	26.5	GB1040	IEC60811-1-1
4	elongation at break	%	900	GB1040
5	Low elongation at break	%	475	GB/T2951.13	IEC60811-1-4
6	Resistance to environmental stress cracking	piece	0/10	GB5470	IEC60811-1-4
7	Low-temperature impact brittleness temperature -76 °C breakage	h	>500	GB/T2951.39	IEC60811-4-1
8	200 °C oxidation induction	min	80	GB/T2951.37
9	Carbon black content	%	2.52	GB/T2951.36	IEC60811-4-1
10	carbon black dispersion	fen	8	GB15065
11	Dielectric strength	MV/m	33.5	GB1408	IEC60243
12	electric volume resistivity	Ω.m	6.5×1014	GB1410	IEC60167
13	dielectric constant		2.45	GB1409	IEC60520